Home

Warning:  I’m a Piano Technician not a Web designer.

 

Tyner’s Piano Tuning

Tuning-Repairing-Regulating-Humidity Control
19 years exp. Call or Text for an appointment! We accept all major credit and debit cards.

704-467-1086

We service the following North Carolina areas.

We Have a great technician in Mt.Holly now!  So Concord and the Surrounding area and Mt. Holly and the Surrounding area!  Call us!

  • Charlotte NC
  • Concord NC
  • Mt. Holly NC
  • Kannapolis NC
  • Mt. Pleasant NC
  • Salisbury NC
  • China Grove NC
  • Landis NC
  • Mooresville NC
  • Huntersville NC
  • Wilmington NC
  • And surrounding areas

With every service we give the piano a complete inspection to make sure there is nothing wrong with it that would keep it from holding a tune. We also tighten the bench bolts and tighten the plate screws.

 

Our Technician Doug Tyner  has over 18 years of professional piano tuning and servicing experience.  Whether you need Repairing,  Regulating, Rebuilding, Humidity Control,  or a Standard Tuning.   Doug can handle all your piano needs.  We want your piano to sound the best it can.

Frequent tunings (every 6-12 months) are needed to keep your piano in tune.  The further out of tune your piano is when it is tuned the less stable the tuning will be.   This is because of tension change.   There is approximately 160lbs. of pressure on each string when it is up to pitch.  The strings run across a wooden bridge connected to a wooden soundboard.   So going from 140 lbs of pressure to 160 lbs of pressure for example will most likely settle the wooden parts after some play on the instrument.

Most of the pianos we service at Tyner’s Piano Tuning simply need a fine tuning and a few minor adjustments to allow a piano to sing again. Our Basic Service Call includes this fine tuning, as well as other small adjustments and minor repairs that will really accentuate your piano’s performance.

Your piano is designed to sound its best when tuned to A-440 (A above middle C vibrates at 440 cycles per second), the international pitch standard. At this pitch, power and tonal range are optimum and your piano will match the pitch of other instruments. When your piano varies from A-440, pitch adjustments are required to bring it back to standard. By always maintaining your piano at standard pitch, you create long-term tuning stability because the strings and structure stay in equilibrium. You also ensure proper ear training because you always hear your music in the correct key.

Why does a piano’s pitch change?

Piano strings change pitch for two primary reasons: the initial stretching and settling of strings when the piano is new, and soundboard movement due to humidity variation. In the case of new pianos, the pitch drops quickly for the first couple of years as the new strings stretch and wood parts settle. It’s very important to maintain any new piano at the proper pitch during this period, so the string tension and piano structure can reach a stable equilibrium. (Most piano manufacturers recommend three to four tunings the first year, and at least two per year after that.)

Aside from this initial settling, climate change is the main cause of pitch change. That’s because the piano’s main acoustical structure — the soundboard — is made of wood. While wooden soundboards produce a wonderful sound, they also react constantly to climate changes. As the relative humidity goes up, the soundboard swells, increasing its crowned shape and stretching the piano’s strings to a higher pitch. Then during dry times the soundboard flattens out, lowering tension on the strings and causing the pitch to drop. The drop in the dry season tends to exceed the rise during humid times, so the net result is a drop in pitch each year that the piano isn’t serviced.

 

Won’t tuning restore my piano’s pitch to A- 440?

If a piano has gone without tuning for an extended period, its pitch may have dropped far below A- 440. This means that each of its approximately 220 strings needs to be tightened considerably, adding tremendous additional tension to the piano’s structure. The problem is that as each string is tightened, the additional load causes the pitch of previously adjusted strings to change. Thus it is impossible to make a substantial change in pitch and end up with a fine, accurate tuning in one step. Instead, a process called “pitch raising” must first be done, in which all strings are raised to their correct average tension levels. (Likewise, when a piano’s pitch is higher than standard, a pitch lowering procedure must be done to reduce string tensions to approximately correct levels.) Only then can the piano be accurately tuned. In other words, accurate tuning is only possible when all strings are so close to their proper tension that only small further changes are needed during tuning. These small changes then do not disturb the tuning of other strings.

 

How far from standard pitch must a piano be before a pitch raise is necessary?

Just when a pitch raise or lowering is necessary depends upon how accurate the final tuning must be, and the size and quality of the piano. Any net change in a piano’s string tension during tuning will distort the final result and reduce stability. Realistically, a pitch difference of a few percent can usually be accommodated successfully during tuning. For average situations, when a piano’s pitch is noticeably different from that of other standard pitched instruments, a pitch correction procedure is necessary before tuning. Whenever exact pitch level is critical, such as in concert or recording instruments, any pitch deviation must be corrected before tuning.

 

How long does a pitch raise take?

A pitch raise is essentially a special tuning procedure designed to leave the piano approximately in tune. For moderate pitch corrections the procedure takes about the same time as a tuning, or less. Extreme pitch changes may require two separate pitch adjustments.

The pitch adjustment and subsequent tuning may be done in one visit, or the tuning may be scheduled for a short time later depending upon how far the pitch had to be changed. In general, the longer a piano has gone without regular service, the more tunings will be required to reestablish tuning stability.

Like your car, your piano is a major investment which deserves regular servicing to keep it working well and preserve its value. Most importantly, the well-maintained piano sounds better, plays better, and gives you and your family a wealth of musical pleasure.

If your piano has not been tuned in the last year and is more than 5% off pitch, it may need what is called a pitch raise. This re-tightens your piano’s strings and allows it to hold the fine tuning.

Professional service is the key to preserving your investment in your piano.  In the first year, the National Piano Manufacturers Association recommends that you have your piano tuned four times.

This is a period of environmental adjustment for a new instrument, and proper attention is important.

After the first year, the piano should be tuned at least twice each year, depending on frequency of use and atmospheric conditions.

Quality pianos demand quality care.  Fine piano require regular maintenance in three areas: tuning, action regulation and voicing.  Tuning is usually required more often than the other service areas, but all three should be a part of any fine piano’s maintenance.

 Due to string stretching, settling and the effects of climate, a new piano should receive at least four tuning in the first year.  After that, the type of us and the location of the piano will dictate the number of tunings required, but we recommend two tunings per year as a minimum.

 

 

Please book an appointment with us today for a tuning.

 

We offer the following Services

Tuning
Repair
Regulating
Humidity Control